Click to enlarge

Universal Bracket Kit II and it's modifications

Bracket Kit II is designed for installation on motorcycles with tubular handlebars (usually found on naked motorcycles) and cast aluminum handlebars (usually found on sport touring motorcycles). It positions a crossbar over motorcycle handlebar(s). Crossbar accommodates installation of "Base Plate I", "Base Plate II" or "Housing for 26xx" (see GadgetGuy bracket tree components). Installation can be enhanced by adding "Extension Joint Assembly" between the crossbar of the "Bracket Kit II" and "Base Plate I", "Base Plate II" or "Housing for 26xx". Two swivel joints can be mounted above the handle bar clamps and positioned forward, backward and upside down. Length of the cross bar may be altered if desired.

GPS wiring options are available in Garmin Accessories (upper left corner of this page).

When filling up on-line order form, please specify your motorcycle year, make and model as well as your GPS model in "Comments" field. It will help to make sure that your purchase will meet your expectations completely.



Click to enlarge
Click to enlarge
Kit II (plain aluminum)

Kit includes:
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x60 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 2 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 1/2" x 7.6" Alum. Rod
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02000-0000$80.15
    Kit II (anodized black)

    Kit includes
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x60 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 2 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 1/2" x 7.6" Alum. Rod anodized black
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02000-0101$88.29
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum modified for 2011 Ducati Diavel.

    Kit includes:
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x65 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 2 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 1/2" x 7.6" Alum. Rod
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02001-0000$86.43
    Kit II anodized black modified for 2011 Ducati Diavel

    Kit includes
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x65 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 2 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 1/2" x 7.6" Alum. Rod anodized black
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02001-0101$92.38
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum with M8 x 70mm mounting screws

    Kit includes:
  • Swivel Joint x 2
  • 1/4-20x3/4 SHCS SS x 2
  • M8x1.25x70 SHCS SS x 2
  • 8mm Flat Washer Zinc Plated x 4
  • 1/2" OD x1/2" tall x 8mm ID SS Spacer x 4
  • 1/2" dia x 7.6" Aluminum Rod x 1
  • 3/16" S.A. Hex Key x 1
  • Installation Instruction
  • ABK02005-0000$92.42
    Kit II anodized black with M8 x 70mm mounting screws

    Kit includes:
  • Swivel Joint (anodized black) x 2
  • 1/4-20x3/4 SHCS SS x 2
  • M8x1.25x70 SHCS SS x 2
  • 8mm Flat Washer Zinc Plated x 4
  • 1/2" OD x1/2" tall x 8mm ID SS Spacer x 4
  • 1/2" x 7.6" Aluminum Rod (anodized black) x 1
  • 3/16" S.A. Hex Key x 1
  • Installation Instruction x 1
  • ABK02005-0101$98.38
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum with M8 x 80mm mounting screws

    Kit Includes:
  • 1 x 1/2" x 7.6" Alum. Rod
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x80 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 6 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02010-0000$100.68
    Kit II anodized black with M8 x 80mm mounting screws

    Kit includes:
  • 1 x 1/2" x 7.6" Alum. Rod anodized black
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x80 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 6 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02010-0101$106.63
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum modified for BMW R1200CL/CLC, R1100R

    Kit includes:
  • 1 x 1/2" x 7.6" Alum. Rod
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x120 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 12 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02020-0000$122.24
    Kit II anodized black modified for BMW R1200CL/CLC, R1100R

    Kit Includes:
  • 1 x 1/2" x 7.6" Alum. Rod anodized black
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x120 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 12 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02020-0101$134.15
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum modified for R1100-1150RS

    Kit includes:
  • 1 x 1/2" x 7.6" Aluminum Rod
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x 3/4" OD x 1 1/2" tall x 10mm ID Aluminum Spacer
  • 2 x M10x1.5x120mm SHCS SS
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02030-0000$127.83
    Kit II anodized black modified for R1100-1150RS

    Kit includes:
  • 1 x 1/2" x 7.6" Aluminum Rod (anodized black)
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x 3/4" OD x 1 1/2" tall x 10mm ID Aluminum Spacer anodized black
  • 2 x M10x1.5x120mm SHCS SS
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02030-0101$137.76
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum for Yamaha FJR 1300 2003-2005 (rear pair of boltholes)

    Designed for installation on rear pair of boltholes in handlebars. Should be used with "Extension Joint Assembly" (see "Universal Brackets" page) for installation of the "Housing for 26xx, 27xx, 28xx". Kit includes:
  • 1 x 1/2" dia x 4.51" Alum. Rod
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x80 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 6 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02040-0000$99.92
    Kit II anodized black for Yamaha FJR 1300 2003-2005 (rear pair of boltholes)

    Designed for installation on rear pair of boltholes in handlebars. Should be used with "Extension Joint Assembly" (see "Universal Brackets" page) for installation of the "Housing for 26xx, 27xx, 28xx". Kit includes:
  • 1 x 1/2" dia x 4.51" Alum. Rod (anodized black)
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x80 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 6 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02040-0101$105.88
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum for Yamaha FJR 1300 2003-2005 (front pair of boltholes)

    Designed for installation on front pair of boltholes in handlebars. Kit includes:
  • 1 x 1/2" dia x 4.8" Alum. Rod
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x110 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 10 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02050-0000$119.10
    Kit II anodized black modified for Yamaha FJR 1300 2003-2005 (front pair of boltholes)

    Designed for installation on front pair of boltholes in handlebars. Kit includes:
  • 1 x 1/2" dia x 4.8" Alum. Rod (anodized black)
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x110 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 10 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02050-0101$125.06
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum modified for Honda ST1300

    Should be used with "Extension Joint Assembly". Kit includes:
  • 1 x 1/2" dia x 3.53" Alum. Rod
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x95 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 8 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02060-0000$114.34
    Kit II anodized black modified for Honda ST1300

    Should be used with "Extension Joint Assembly". Kit includes:
  • 1 x 1/2" dia x 3.53" Alum. Rod (anodized black)
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x95 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 8 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02060-0101$120.29
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum for R1200C with 50mm SHCS in handlebar clamps

    Kit Includes:
  • 1 x 1/2" x 7.6" Alum. Rod
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x80 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 2 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02070-0000$84.01
    Kit II anodized black for R1200C with 50mm SHCS in handlebar clamps

    Kit Includes:
  • 1 x 1/2" x 7.6" Alum. Rod anodized black
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x80 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 2 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02070-0101$89.96
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum for R1200C with 93mm SHCS in handlebar clamps

    Kit Includes:
  • 1 x 1/2" x 7.6" Alum. Rod
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x120 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 2 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02080-0000$86.51
    Kit II anodized black for R1200C with 93mm SHCS in handlebar clamps

    Kit includes:
  • 1 x 1/2" x 7.6" Alum. Rod anodized black
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x120 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 2 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02080-0101$92.46
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum for Harley Davidson

    Kit includes:
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x 5/16-18x2 1/4 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 2 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 1/2" x 7.6" Alum. Rod
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02090-0000$76.86
    Kit II anodized black for Harley Davidson

    Kit Includes:
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x 5/16-18x2 1/4 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 2 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 1/2" x 7.6" Alum. Rod anodized black
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02090-0101$82.81
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum for Harley Davidson (1" stack spacers)

    Kit inclides:
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x 5/16-18 x2 3/4 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 4 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 1/2" x 7.6" Alum. Rod
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02110-0000$85.20
    Kit II anodized black for Harley Davidson (1" stack spacers)

    Kit Includes:
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20 x 3/4 SHCS SS
  • 2 x 5/16-18 x 2 3/4 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 4 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 1/2" x 7.6" Alum. Rod anodized black
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02110-0101$91.15
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum modified for YZF600R

    Shown with "Base Plate II" and mount for Garmin StreetPilot III. Kit includes:
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M6 Stand Off for YZF600R
  • 2 x 5/16-18 x 1 1/4 BHCS SS
  • 1 x 1/2" x 7.6" Alum. Rod
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02120-0000$169.44
    Kit II anodized black modified for YZF600R

    Kit includes:
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M6 Stand Off for YZF600R
  • 2 x 5/16-18 x 1 1/4 BHCS SS
  • 1 x 1/2" x 7.6" Alum. Rod anodized black
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02120-0101$175.39
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum modified for Aprilia Futura

    Shown with "Base Plate II". Kit includes:
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M6 Stand Off for Aprilia Futura
  • 2 x 5/16-18 x 1 1/4 BHCS SS
  • 1 x 1/2" x 7.6" Alum. Rod
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02130-0000$169.44
    Kit II anodized black modified for Aprilia Futura

    Kit includes:
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M6 Stand Off for Aprilia Futura
  • 2 x 5/16-18 x 1 1/4 BHCS SS
  • 1 x 1/2" x 7.6" Alum. Rod anodized black
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02130-0101$175.39
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum Modified for Ducati ST3 pre 2004

    Kit includes:
  • 1 x 1/2" x 11.25" alum. crossbar (plain aluminum)
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M6x1x50 SHCS SS
  • 2 x 8mm to 6mm Swivel Joint Adaptor (upper)
  • 2 x 8mm to 6mm Swivel Joint Adaptor (lower)
  • 1 x 3/16" S.A. Hex Key
  • 1 x 5mm S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02140-0000$114.14
    Kit II anodized black Modified for Ducati ST3 pre 2004

    Kit includes:
  • 1 x 1/2" x 11.25" alum. crossbar (anodized black)
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M6x1x50 SHCS SS
  • 2 x 8mm to 6mm Swivel Joint Adaptor (upper)
  • 2 x 8mm to 6mm Swivel Joint Adaptor (lower)
  • 1 x 3/16" S.A. Hex Key
  • 1 x 5mm S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02140-0101$120.09
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum K1200RS/GT 2001-2005 above dash

    Kit includes:
  • 1 x 1/2" x 12.15" alum. crossbar (plain aluminum)
  • 2 x Swivel Joint / Couterbore for M5 SHCS (plain aluminum)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M5 x 0.8 x 35 SHCS SS
  • 2 x 1/2" OD x 3mm tall x 5mm ID SS Bushing
  • 1 x 4 mm S.A. Hex Key
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02150-0000$83.69
    Kit II anodized black K1200RS/GT 2001-2005 above dash

    Kit includes:
  • 1 x 1/2" x 12.15" alum. crossbar (anodized black)
  • 2 x Swivel Joint / Couterbore for M5 SHCS (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M5 x 0.8 x 35 SHCS SS
  • 2 x 1/2" OD x 3mm tall x 5mm ID SS Bushing
  • 1 x 4 mm S.A. Hex Key
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02150-0101$89.64
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum for Yamaha FJR 1300 2006

    Should be used with "Extension Joint Assembly". Kit includes:
  • 1 x 1/2" dia x 3.53" Alum. Rod
  • 2 x Swivel Joint
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x80 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 6 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 2 x Yamaha FJR 1300 2006 Cap plain alumium
  • 2 x M4 x 0.7 x 25 BHCS SS
  • 1 x 3/16" S.A. Hex Key
  • 1 x 2.5mm S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02160-0000$129.94
    Kit II anodized black for Yamaha FJR 1300 2006

    Should be used with "Extension Joint Assembly". Kit includes:
  • 1 x 1/2" dia x 3.53" Alum. Rod (anodized black)
  • 2 x Swivel Joint (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x80 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 6 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 2 x Yamaha FJR 1300 2006 Cap plain alumium
  • 2 x M4 x 0.7 x 25 BHCS SS
  • 1 x 3/16" S.A. Hex Key
  • 1 x 2.5mm S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02160-0101$135.89
    Click to enlarge
    Click to enlarge
    Kit II plain aluminum K1100LT above dash

    Kit II includes:
  • 1 x 1/2" dia x 18.75" aluminum rod for GL1500 (plain aluminum)
  • 2 x Swivel Joint / Couterbore for M5 SHCS (plain aluminum)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M5 x 0.8 x 25 SHCS SS
  • 4 x 19mm OD x 5mm ID x 2.5mm thick Nylon Washer
  • 1 x 7/16 x 3/16 x 1/8 Rubber Grommet
  • 1 x 4 mm S.A. Hex Key
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02170-0000$72.97
    Kit II anodized black K1100LT above dash

    Kit II includes:
  • 1 x 1/2" dia x 18.75" aluminum rod for GL1500 (anodized black)
  • 2 x Swivel Joint / Couterbore for M5 SHCS (anodized black)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M5 x 0.8 x 25 SHCS SS
  • 4 x 19mm OD x 5mm ID x 2.5mm thick Nylon Washer
  • 1 x 7/16 x 3/16 x 1/8 Rubber Grommet
  • 1 x 4 mm S.A. Hex Key
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation Instruction
  • ABK02170-0101$78.92
    Click to enlarge
    Kit II modified for BMW S1000RR

    Kit II includes:
  • 2 x Swivel Joint (plain aluminum)
  • 2 x 1/4-20x3/4 SHCS SS
  • 2 x M8x1.25x70 SHCS SS
  • 4 x 8mm Flat Washer Zinc Plated
  • 6 x 1/2" OD x1/2" tall x 8mm ID SS Spacer
  • 1 x 1/2" dia x 6.5" Aluminum Rod (plain aluminum)
  • 1 x BMW S1000RR handlebar adaptor for Kit II TOP LEFT
  • 1 x BMW S1000RR handlebar adaptor for Kit II BOTTOM LEFT
  • 1 x BMW S1000RR handlebar adaptor for Kit II TOP RIGHT
  • 1 x BMW S1000RR handlebar adaptor for Kit II BOTTOM RIGHT
  • 1 x 3/16" S.A. Hex Key
  • 1 x Installation instruction
  • ABK02180-0000$179.88
    About my brackets