Click to enlarge

Base Plate I and II

"Base Plate I" is made for Garmin Dashboard Mount P# 010-10199-02 (purchased separately). "Base Plate I" in combination with Garmin "Automotive Mounting Adapter for GPSMAP 176/176C" P# 010-10259-00 and "Base Plate III" provide simple solution for mounting radar detectors on motorcycles. For more details please click on "Tips on installation of Radar Detector on Base Plate I" link at the bottom of the page.

"Base Plate I" is compatible with following GPS mounts and gadgets:

Garmin Zumo 350LM/390LM/395LM Garmin P# 010-11843-00 (comes with GPS unit)

Garmin XM receiver GXM-30 and GXM-40

TPX Radar Detector

Base Plate I can be also modified for installation of TomTom Rider GPS. Screw hole pattern TomTom Rider GPS motorcycle cradle will be added per individual request at no extra charge.

"Base Plate II" is compatible with following GPS mounts:

Street Pilot III/SP III Deluxe: Garmin P# 010-10304-00 (comes with GPS unit)

GPSMAP 176/176c, 196, 276c, 376c, 378, 478: Garmin P# 010-10257-00 or 010-10511-00(comes with GPS unit).

Street Pilot 26xx/27xx28xx series: Garmin P# 010 10495-00 (purchased separately)

Quest, Quest2: Garmin P# 010-10610-00 (purchased separately)

Garmin Zumo 220: Garmin P# 010-11143-07 (comes with GPS unit)

Garmin Zumo 550: Garmin P# 010-10859-00 (comes with GPS unit)

Garmin Zumo 590/595: Garmin P# 010-12110-00 (comes with GPS unit)

Garmin Zumo 660LM/665LM: Garmin P# 010-11270-03 (comes with GPS unit)

Garmin Montana 600/600t/610/610t/650/650t/680/680t: Garmin P# 010-11654-01 (purchased separately)

Garmin Monterra: Garmin P# 010-11654-01 (purchased separately)

RAM cradles: RAM Cradle with 1.9" (48mm) screw hole pattern (purchased directly from RAM)

Two separate clamps bolted to the back of the Base Plate I and II made to attach it to the 1/2 aluminum rod of GadgetGuy Bracket Kits. It is also possible to adapt it on the cross bar of dirt and enduro type bikes as well as ATVs. Required diameter of clamping surface is 0.5". Since the diameter of cross bar on different vehicles is different, the gap between the cross bar and the bracket clamps has to be filled with shims. Shim's stock is available in many hardware stores. It is also possible to substitute the shim stock with aluminum from can of soda. A set of 0.015" shims for installation on BMW crossbars is available in "GadgetGuy Components". For more details please click on "Tips on installation of Garmin components on Base Plate II" link below.



Click to enlargeBase Plate I (plain aluminum)
ABP00001-0000$74.88
Click to enlargeBase Plate I (anodized black)
ABP00001-0101$81.23
Click to enlargeBase Plate II (plain aluminum)
ABP00002-0000$79.68
Click to enlargeBase Plate II (anodized black)
ABP00002-0101$86.03
Tips on installation of Radar Detector on Base Plate I.

Tips on installation of Garmin componetes on Base Plate II.